Brakes repairs in Hendon

Brakes are an essential component, as they make up the safety system of the car. In case your brakes are not properly functioning, you might have to face many challenges on the road. In fact, your car can break down in the middle of nowhere. Also, you might have to bear major mishaps; therefore, the perfect condition of the brakes is crucial for the safety of the driver and those driving around him. In order to ensure that brakes are working in the best manner, regular brake maintenance is the key.

Like any other component of the car, brakes also go through wear and tear. In fact, brakes are designed in a way to wear slowly over time. The brake assembly is such that malfunctioning brakes impact surrounding components by adding more stress to other parts, like rotors, drums, and callipers. If you delay getting the brakes checked or rectified, the problem might worsen to a point where nothing but a replacement will help. The replacement might cost hundreds of dollars, so the best approach is to prevent such problems from arising. Regular checkups help identify and rectify brake problems at an initial stage, saving you hundreds of dollars in the long run.

How do brakes work?

Many vehicle owners overlook the slight problems and take for granted the complexity of the braking system. The braking system in your car is definitely the most critical safety element, as it performs the function of stopping or slowing down the car in a fraction of a second. As a result, your car remains safe from accidents and severe breakdowns.

The braking system is quite complex and sophisticated. It is made up of sub-parts that work in coordination with each other. When the car is in motion, Kinetic energy or motion energy is in abundance within the car. The braking system converts the kinetic energy into heat through friction to stop the car from moving. Therefore, friction should be large enough to be able to stop the wheels from spinning. The braking system does the job when the brake pedal is pressed. The pressure over the brake pedal makes the lever push a piston within the master cylinder. Hence, fluid in the master cylinder is forced through brake lines that are connected to the cylinders on the wheels. These cylinders engage the brake pads, which in turn will engage the rotor, producing the friction required to stop the wheels from spinning.

You must be wondering how the small force you apply to the brake pedal stops a heavy car. Well, the hydraulic system does the job by multiplying the small force to stop a vehicle which weighs more than 5,000+ pounds. The process of friction generation releases a huge amount of heat; therefore, brake pads must be made of high-quality heat-resistant material. The huge amount of heat makes the brake pads susceptible to wearing out or breaking down over time.

What are the components of a braking system?

Brake pads:

Brake pads are highly prone to wear out, as they take the brunt of the friction and heat when stopping the vehicle. Therefore, brake pad replacement is one of the most common replacements performed. Over time, you might experience signs of worn brake pads, such as screeching or grinding noise or difficulty pushing the pedal. In such a situation, get your brake pads checked immediately, otherwise, it can be life-threatening. It is recommended to replace your brake pads every 15,000 to 30,000 km, but it varies depending upon the driving habits and mileage covered, ad the type of vehicle.

Rotors:

The rotors on the brakes are the metal discs against which the brake pads are forced to produce friction. It is quite common for rotors to become damaged or warped; however, they last longer than brake pads. If you continue driving with overly worn brake pads or lose pad material, you will begin to damage the rotors because of metal-to-metal contact. Be very vigilant when it comes to the condition of rotors; Look out for any cracks, scratches, or irregularities. If issues are identified early, brake rotors can be resurfaced rather than replaced.

Brake fluid and lines:

The brake fluid is an important hydraulic fluid that converts the pressure on the pedal to the brake piston and stops the vehicle. Since brake fluid is present in a sealed system, it can last a long time. However, moisture and air can reach the brake lines, causing damage to the brake lines which in turn leads to fluid leakage, both major leaks and smaller leaks. Therefore, it is recommended to have your brake lines and brake fluid inspected regularly. Although your mechanic will check this every time you take your car for servicing, you can get it checked whenever you observe any unusual signs. Moreover, mechanics will flush the brake fluid from the braking system when needed. The recommended intervals for changing brake fluid range from every 24 months to every 40,000km or whenever needed.

What are the signs of malfunctioning brakes?

  • Brake light indicators appear on the dashboard
  • Squealing or grinding noises whenever brakes are applied
  • Wobbling or vibration while braking
  • Fluid leakage or spongy and soft brakes
  • Car pulling to one side or difficulty handling the vehicle
  • A sharp, burning smell indicates overheated brakes

Take your car to a reliable and reputable garage if you observe any of the above-mentioned signs. If you want to improve the longevity and performance of your car, do not overlook the importance of brake servicing and maintenance.